DC Miniature Circuit Breaker, 2 Pole 1000V 32 Amp Isolator for Solar PV System, Thermal Magnetic Trip, DIN Rail Mount, Chtaixi DC Disconnect Switch C32

Decent price and easy to install.

Seems to be a good and reliable breaker so far, but have only been used for testing at this point in intended circuit. That being said, power pass through as well as breaker shut on and off functions well.

I installed 3 of these almost a year ago. I have had no issues with PV voltages from 3 solar arrays, all putting out up to 500 Vdc at times. I recently rewired a PV array of 12 panels. Made the mistake of inverting the polarity. When I turned on the breaker, it smoked, bigtime! then all was silent. No fire, no melting of the breaker. I measured the voltage at the input and realized the polarity was reversed. My bad! I disabled the voltage at the panels, rewired correctly, and connected to a new breaker. All worked well.My biggest point with this review is, even though the breaker fried, it kept the reverse voltage of over 400 Vdc from getting to the solar inverter and causing hundreds to thousands of dollars in damage. The breaker not only will trip if the amperage is exceeded, but also protects from reversed Vdc. Very thankful!

Good breaker and was easy to install. Feel the money was well spent. Works good.

i'm using these between a set of solar panels wired in series-parallel and what has quickly become my most favorite compact Victron Solar Charge Controller, especially at its more recent favorable price (this one: https://amzn.to/3JhCLgR). I have found these miniature circuit breakers do the job perfectly: they are easy to install using the provided DIN rail and screws, easy to slide on/off or clip on/off to the rail while working with the cabling, and while a few other reviewers have mentioned cable grip, I have been fortunate, and have found the breaker to grip the cables well. It is important when purchasing breakers like these to consider size matching to ensure that the gauge of cable being used is an appropriate size for not only the electrical requirements of the system, but also for the cable slots in both the charge controller and the circuit breaker.PRO TIP: it is also important to carefully strip the wire ends to a proper length. The goal is adequate exposure to the terminals and terminal clamps, but not more than that. With both these breakers and the Victron charge controller, I was able to use 6AWG cable, stripped back about one-half inch, and the cables seated cleanly and firmly.Overall, not only is it a best-practice to safeguard your solar setup with proper breakers and/or fuses, it also makes it more convenient, safer, and provides some peace-of-mind when you need to work with it. Enjoy!

Work so well I ordered another one

I bought two of these they work great for pv disconnects in my solar system

Very good