TIE DOWN ENGINEERING Certified C60 Galvanized Strapping - 37 feet long | Securing Mobile Homes, Sheds, Tanks, and Reinforcing Outdoor Structures in High-Wind Areas - Made in USA

Used this strap to reinforce the holding tanks on my travel trailer. From the factory, the three tanks had only two straps under the ends of the tanks. Now they each have three additional straps for a total of five each. And I doubled them up on the ends, wrapping them around the metal frame to make the attachments even stronger. The strap is really hard to cut with tin snips, but surprisingly, you can bend the straps a couple times and you'll hear a brittle cracking noise. A couple more bends and the strap cracks across the bend.

Really worked out well for me to use for a propane tank hold down on 500 gallon tank at each end. High quality- -stiff...

Right stuff to meet code in AZ.Only a dollar less than my supplier.

Thanks

This item was need to help tie down shed.

Easy to work with. No sharp edges to cut hamds or gloves. Slightly shorter than advertised, but more than sufficient for anchoring a low shed at 4 points.

I have a 93 motorhome that I had to remove my blackwater (pooper) tank (that's a whole story by itself). The original support straps had been cut by someone in the past and they had rigged up a crappy (pun unintended) way of supporting the tank. When I was re-installing the tank, I wanted to use strapping similar as to what had been originally installed by the manufacturer. RV places don't tell you what to use or offer to sell you anything. I found this on AMAZON (aren't they great!) and it worked perfectly. A tank full of waste in my rig is about 300 pounds. No problem for this stuff!

Just what I wanted

Great straps and fast shipping. (Don’t forget to order two bolts per strap)

Good product with fast shipping