Name: UCTRONICS 0.96 Inch 128X64 Yellow Blue Display OLED module This OLED display module is small, only 0.96" diagonal, it is made of 128x64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip. There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project. Features: OLED self-luminous, no backlight needed Size: 0.96" Driver IC: SSD1306 Voltage: 3.3V-5V DC View angle: > 160° Resolution: 128 x 64 Working Temperature: -30°C~70°C Display: 2 rows of yellow, 6 rows of blue Module dimension: 27mmx 27mm x 4mm Screen material: glass, need good protection SPI Interface: GND (Ground) VCC (3.3V/5V) D0 (Clock) D1 (Data) RES (Reset) DC (Data/Command) CS (Chip Select) Note: the default mode is SPI, it can be changed to I2C mode by following steps: 1) Remove R3 resistor. 2) Soldering 4.7K resistor on position R1, R4, R6, R7. 3) Short R8 or solder 0ohm resistor on R8. I2C Interface: D0-SCL, D1-SDA, RES-PIN7, VCC-3.3/5V, GND-GND Package including: 1pcs UCTRONICS 0.96 Inch 128X64 Yellow Blue OLED Display Module
Trustpilot
3 weeks ago
1 month ago
