HaidaRear Lens ND8 ND16 ND64 ND1000 Filter Kit with Adapter Ring Nano Coating Neutral Density Filter Set for Sony 14mm f/1.8 GM Lens

Throw away the chocolate soft and incorrectly sized screwdriver (too big) as that will not fit the screws before you damage them trying. I didnt even attempt to use this once I found it was the wrong size.There are 3 black screws supplied already fitted into the high quality metal replacement part you will fit to the lens. Remove these first (you may need a microscope to see them!) Use a quality correct fitting screwdriver.Then remove the nikon plastic original part and keep it, and its 3 screws safe to refit when you sell the lens. . And fit the new part using the new black screws that are provided. It literally took 3 minutes. But you need good eyes.Theres no image degradation or sharpness loss visible when comparing before and after at 300%, no "blooming" or flare when lights are near the edges of the frame as you get with front mounted 112mm filters. If you care about image quality and not having to cary a bunch of huge 112mm filters then buy it! A much neater solution. This was on the Nikon Z8 with Z 14-24 F2.8S

Everything is fine. I RECOMMEND!!!

Great option to adapt the Sony 14mm f1.8 GM to accept a more substantial filter option.A little fiddly to install, but to be fair, that’s should only be expected.Only slight negative (which may be a bit unfair with regard to this specific product) would be the very limited options of available filters that can be used with the adaptor from Haida.

The rear lens kit does not come with a screwdriver as stated in the description and on the box. You need to have a very small screwdriver to remove the existing filter holder from the lens along with a very steady hand. Fitting and removing the lens filters is extremely difficult to do even in a dust-free environment and it is next to impossible to do in the field without dropping them or getting them covered in finger prints.

The media could not be loaded. There is no ring adapter that I have paid for which is essential for these to be able to be used what a waste of time don't waste your money on this product

I have the kit for the Nikon Z 14-24 2.8 S lens and the filters themselves are great, image quality is very good with each of the high quality glass filters. My problem with the kit is the holder itself, it is well made and looks built to last, but it’s also a lot more reflective than the Nikon original part. This showed up as a bright white bloom across the top of the image in lower light situations. Usually a high contrast scene with an overcast sky. It seems to be due to a mix of the badly designed white branding and text on the back, as well as the more reflective material. It took weeks of frustration before figuring out the cause. I have now painted the entire holder with matte black enamel paint (one used for Airfix kits that I had in the house). The matte paint completely eliminates the reflection problem but I am taking a star away for the frustration this caused and the poor choice of finishing on the holder.