10Gtek [4 Pack] 10Gb SFP+ SR Multimode Module 300-meter, 10GBase-SR LC Transceiver Compatible for Cisco SFP-10G-SR, Meraki, Mikrotik S+85DLC03D, Ubiquiti, Netgear, Zyxel, Qnap,Synology,D-Link and more

I've a pair of budget web managed switches, dual 10Gbps SFP+ cages and 4x 2.5Gpbs ethernets. One upstairs and one downstairs with a 25m 10Gbps duplex multimode fibre run between them. These SR (short reach) optics are perfect for them. I plugged the SFP+ in, and they just worked.Pings over the LAN are sub 1ms and 100% reliable, perfect.Note: Certain devices require registered/vendor specific SFPs, the large enterprise network device vendors, but for Netgear, Asus, D-Link etc these should be fine.

Works fine with Ubiquiti switches. I needed an 8m run and originally tried a DAC as they are the most power efficient but at that length the coax is thick and actually did not work..These work great with a premade fibre which was easier to pull than the thick DAC. I don't have exact power measurement on my SFP+ ports but the whole switch drew <3w more than with a DAC and unlike a 10BaseT these don't get scalding hot so I am guessing are pretty efficient.

These are excellent. Work great in both Netgear and Mikrotik switches.

I purchased over 100 of these two years ago to use in a data centre when upgrading the network to 10 Gbps using MikroTik switches. I was initially sceptical about their quality due to their low price, but after two years of use, not a single one has failed, which is better than what I experienced with expensive branded transceivers.

I bought this to extend my home network into a different part of the house over a 30m fibre. The transceivers came in a cute little tin and worked immediately with my TP-Link switches. The link has been reliable and appears to be working at the full 10Gbit/s.

I bought these to run in my Ubiquiti gear, works flawlessly.

Works with cisco smb switches just plug it in and connect your fibre cable. No issues at all. A++++

Using four of these to do 10Gb fiber networking for fast NAS access. These do it. They do it well. Had them in for about a year now and 0 issues. Using with two Mikrotik switches. All I had to do was set the frame size and then get consistent +1GB file transfers. I'm actually struggling to find a large enough file to fire back and forth before the transfer window closes. iPerf confirms these speeds.I am blown away at how good an cheap these networking components are these days.