2PC 433MHZ For BFT Garage Door Remote 2 Channel For BFT Mitto 2 gate remote Opener 12V Electric BF Gate Key Fob

Good product, works well and the video was very helpful. Otherwise you can also find plenty on you tube that explain how to program the fob.

Did not work for me as I had an incompatible remote, but returning was easy

this product was perfect and so easy to program , thank goodness for Amazon as I was quoted £70 for two and this product was less than £ 20 for two

Really good

Definite manufacture/batch issue with these.I can't send them back as I threw the packaging, error. Otherwise I would be returning the items.The plastic case buttons don't properly reach the PCB buttons, therefore you have to squeeze REALLY hard. These can't be genuine BFT items - do not buy. Go through a proper electric gates company.

I was a bit nervous to order in case it was not compatible and how to program, but this is extremely easy to program using your existing gate remote/fob and keep as spares.Step 11. Stand by the motor gate2. Press and hold the top 2 buttons on the EXISTING remote (you should see a light come on) and count to 2 and then release the 2 buttons.3. Then hold the open gate button on the EXISTING remote and count to 2 then release the button.Step 2Now do exactly the same thing on the NEW remote, as in:1. Press and hold the top 2 buttons on the NEW remote (you should see a light come on) and count to 2 then release the 2 buttons.2. Then hold the open gate button on the NEW remote and count to 2 then release the button.If you have multiple new remotes, just repeat the sequence in Step 2 on the NEW remotes, there is no need to do step 1 as long as you do it switfly one after the other. I programed 3 new fobs in less than 20 seconds.Finally, wait for 20 seconds after the last button press before testing the remote! This timer allows the remotes to come out of programming modes.Enjoy!

Very pleased with this product. It was easy to program and works perfectly.I would recommend this item.

- Have just received this, it’s almost identical to the current BFT FOBs we have, except the coating is a bit more premium and has a nicer feel, along with the red LED being noticeably brighter.- In terms of range it’s perfect, at least matches my old one, perhaps can do better but have not tested.- Well-priced and neatly packaged in yellow envelope. Even comes with a small keyring on string- One thing I have done is replace the battery immediately, as the current battery seems unbranded/cheap, a bit flimsy and probably won’t last that long. I put in an energizer 23A which has never done me wrong.- Instructions with it weren’t clear but all it took was a quick YT tutorial.If you already have this same FOB or the 4 button equivalent all you have to do is:1. Hold both buttons on OLD remote briefly until LED comes on2. Press current open button on OLD remote.3. Hold both buttons on NEW remote until LED comes on4. Press button you want to use on NEW remote.All within a space of approx 10sVery easy, might take a couple attempts to get a hang of it.Older remotes have a ‘secret’ button rather than holding both buttons, again YouTube video by gateremotes.co.uk shows this across different types.If this doesn’t work, your gate may not be set up to be programmed. You’ll have to refer to manual/support re control panel. Note it appears you must first have a current working remote for this to work