Creality Official PEI Plate with Adhesive for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Ender 5/Ender 5 Pro 3D Printers

First, I love it. Works fantastic and releases the prints like magic. I can't find fault with anything about this new bed plate.I've had my Ender 3 V2 since it was released in the summer of 2020. It came with the glass bed and it worked well until recently, nothing would stick and prints would fail. My son who owns a new Bambu Labs printer suggested a PEI magnetic replacement bed, so I purchased the Creality model designed for their printers.This is MAGIC, some kind of Vudu sorcery how well this works. I should have upgraded years ago. PLA sticks very well and when the bed cools it pops off with a light touch! I don't even have to lift the bed off the heater, it just is perfect. I love the texture it produces and you can print on both sides. The Gold is a nice classy upgraded refresh look for the printer that is showing it's age. The magnetic 3M peel and stick is easy to apply and holds the print bed very firmly, no wiggle.This is a Great value and will keep this printer going a little longer until I save up for a Bambu Labs. If your prints aren't sticking to the old glass anymore, and your hoping to get a few more prints out of that old machine this will help.

Best build plate I've used!Pros:I have an ender 3 and have had the original bed plate since 2021. I've tried glass plates (hit or miss) but ultimately went back to the original creality bed plate.I use Hatchbox pla and it adheres with zero issues. When printing has finished, my prints come off with ease and no residue. So easy to clean the purge filament and print that I no longer have a use for the scraper that came with the printer.The magnet that you stick to the bed has the precise amount of magnetism you want where it the pei plate won't move during a print but not overly strong where you can remove it. As close to perfect as it gets.The price was absolutely worth it and didn't break the bank at just 15.Quite possibly the best 15 you will spend on an upgrade.Cons: only one con (possibly) if you for whatever reason need access to the screws that hold the adjustment wheels removed it could be difficult since the magnet is stickered onto the bed.Other notes: the size is accurate for my ender 3 and completely disregard the reviewer video that showed his not staying in place. That video was either fake or he did something wrong. I fully recommend this to anyone needing to resolve adhesion issues, or wanting to eliminate clips.I would recommend one more thing before this upgrade: upgrade your knobs to metal and replace your springs with silicone not another set of metal springs. Silicone is superior in my opinion.Hope this helps someone!

I used to fiddle around with the glass plate and a glue stick, all that bs until I found this product. Very nice surface texture, no adhesive needed... Won't be going back to anything else

I had been suffering major adhesion issues printing PLA with the stock PC Spring Steel Plate that came with my Ender 3 v2 Neo. It had gotten to where I would have to slow the first layer speed all the way down to 10mm/s and use glue just to get anything to stick. I decided to try this PEI Plate and I was not disappointed!Since switching to this build plate, all that is required prior to a print is a quick wipe with 91% Isopropyl Alcohol. I've been able to bump up the first layer speeds to a reasonable level and haven't had to bust out the glue stick at all (though you will need it for PETG as a release agent since it sticks too well to PEI). Parts pop right off with a quick bend as soon as the plate has had a chance to cool. his is probably one of the best updates you can make if you are still using the stock plate or a glass bed.The only potential downside here is that it is pretty heavily textured so the bottom of your print will be similarly bumpy. I actually like the finish it provides though. It almost ends up looking glittery in the right light.

Was not bad at all to install. Just install to a cold plate. Make sure to level the bed after, as it does raise it up.Printing my first print on it right now. Seems to be going just fine.Magnet is stong, I have no concern that the plate is going to move off of it. No bubbles in my magnetetic part. I start to peel one side of the tape, positioned it, then pull the tape as I set down the magnet. No problems.Easy upgrade to install, and get rif of those clips that the factory build plate uses.

After experiencing adhesion issues with a glass plate, I decided to switch to this bed leveling system paired with a different plate. The difference has been remarkable. Not only are my prints now of higher quality, but they are also far easier to remove compared to when I was using the glass bed. This switch has greatly improved my printing experience, providing both better results and increased convenience.

This is my second one so far and I can't recommend it enough. No need for glue, just get the leveling right and you are set. Once the plate cools off, prints automatically unstick as if you just set them there. No more scrapers, no more glue, truly a quality of life upgrade.

This board changed everything! A tad bit of hairspray for safe measure and your prints sticks super well and this is easiest way I've ever had to remove my prints. Love it!! And it's not even getting scratches from occasional stick, but I didn't put on hot plate. I attached to older glass. The sticky part is a very very hard thing to remove. Would have to remove plate and blow torch it to get it off...imo. But I just set temp 3to4 degrees hotter using glass and magnet plate, adjust Z axis a tad and alls well...