Thermal Grizzly KryoSheet (38x38x0.2mm) – Ultra High Thermal Conductivity Graphene Thermal Pad – Perfect Alternative for Thermal Paste on CPU/GPU/PS4/PS5/Xbox – Made in Sweden

I installed the Thermal Grizzly KryoSheet (33x33x0.2mm) on my AMD Ryzen 9 9950X3D, and the results have been outstanding. Compared to traditional thermal paste, this graphene thermal pad delivers lower temps, faster thermal transfer, and zero mess during installation. It was incredibly easy to apply – just set it in place, mount the cooler, and you’re done. No spreading, no cleanup, and no worrying about reapplication down the road.On my system, I noticed significantly more consistent temps under heavy gaming and productivity loads. The KryoSheet keeps my CPU cooler and stable, which is critical for a processor like the 9950X3D. It’s also reusable, which makes it even more cost-effective long term.If you’re a PC builder or enthusiast looking for the best alternative to thermal paste, this is it. Highly recommend for anyone running high-performance CPUs or GPUs – it’s a game changer!

Wow, this is fantastic. No more hotspots, no more anxiety of needing to replace paste/did I get enough paste? No more degration of paste. I trimmed off about 8mm for my i7 14700KF and it fits perfectly. I used a sharp razor blade knife from Home Depot. I used to hit 100c easily now its rare to get to 92c under full stress test. I'm seeing 10c drops when gaming. These are fragile but its not that big of a deal.

Any reviews complaining about how fragile and easily damaged these pads are from clumsy impatient people who can not be bother to slow down and take their time in order to use it properly. I had no issues handling and applying this pad with no damage and used the method of using the absolute teeniest tiniest little dot of thermal paste on each corner with a light tap in order to keep the pad in place while delicately lowering and screwing down a massive cpu air cooler with zero issue. Take your time, take it slow, and do it right the first.As for performance and ease of use. i can safetly say i will never use thermal paste again as long as i can get these as it surprisingly dropped all of my temps and average temps on a 5950x by around 5c. Not much change on the minimum temps but i am very happy to not have this cpu spike as much into the red and happily remain in the mid 70 to low 80's under heavy load with the benefit of not having a massive mess of paste to clean just to repaste it again if anything is wrong and risk damaging the cpu pins or socket since certain paste's love to act like glue even when the cpu is hot and refuse to let the cpu go which results in you ripping the cpu out of the socket because the paste fused it to the cooler which is just another step to worry about trying to pull them apart without any damage. This pad is a absolute life saver for cleanup as well as reducing temps, even if the temp reduction is not by very much if any for the benefit of not having to use paste or dismantle your system again for quite some time. The instructions also recommend that you really should replace it after use rather than reuse it due to damage from the first initial install and i dont mind that since i will rarely be taking my systems apart, and if i do then i will gladly buy another pad or two when the time comes for me to take it apart, rather than risk any issue.Yes they are pricey but in my opinion they are extremely worth it for those who will rarely remove their cpu cooler for long periods of time and want a simple no mess solution that matches or even outperforms paste (in my case) if your lucky, etc. Highly recommended!

I picked up the Thermal Grizzly KryoSheet for my AMD Ryzen 9950X3D, and I’m genuinely impressed with the results. This CPU is no slouch, especially under multi-core workloads, and I was looking for a clean, high-performance thermal interface that didn’t involve reapplying paste every few months. The KryoSheet has delivered.After installation, idle temps were stable at around 46C, and load temps hovering around 55C with my AIO cooler. More importantly, sustained loads during gaming and rendering show a noticeable improvement than previous thermal paste products - which is especially important for the 9950X3D’s 3D V-Cache, which can heat up quickly.One word of caution: this pad is thin and very delicate. You will need to handle it with precision! It's also electrically conductive, so make sure it’s perfectly aligned on the IHS to avoid shorts. I recommend doing a dry fit before final placement.For those with a high-end Ryzen CPU like the 9950X3D, the KryoSheet is a solid, mess-free thermal solution—just be ready to install it carefully. However, it's definitely worth the price, and I never have to worry about it drying out for the life of the CPU and cooler.

the application was fairly straightforward and it worked well and kept my temps cool during the warmer months when my CPU would normally overheat.But after almost a year of use the heat melted it (didn't liquefy just kinda fused it) to the cooler, so when i tried to remove it for some maintenance the pad crumbled and fell apart. TLDR: worked perfectly until i tried to remove it.