Allcam Heavy Duty Mount Size Adapter Kit For TV Wall Mounted Brackets - Ultra Slim Design Will Adapt Mount Size 200x200 to Mount Size 300x300 & Mount Size 400x400 w/screws & nuts

Does what it is supposed to do, quite sturdy. Being in two halves makes it easy to fit. Bonus including the screws, spacers etc.

Purchased this on a whim, as I have a TV with a 400x400 VESA !! I mean is there really any need. I was going to sell the tv but then the one we have wall mounted in our kitchen gave up. The existing TV bracket was for a smaller VESA but with ample weight loading so I checked to see if an adapter of sorts existed, and found this! Purchased on the off chance that it would work and it really does work well. Note - Some of the provided screws were a bit small (in head diamiter) so I swapped these out for something a bit larger but otherwise put together with provided equipment and instructions.

I bought this to extend my 200 x 200 Vesa moun to take a large Amazon Fire TV. The plates sit firmly and the finish and quality of the screws and spacers is good.

Solid brackets and adaptable for what I needed, but the bolts that should have been included were not, meaning I had to go and source my own, which further meant I had to wait a couple of days before I could mount my new TV to the wall.

Bought to adapt 200 x 200 vesa to 300 x 300.Does the job, easy to fit. Good sturdy product

I bought a new TV which had VESA points lower than the TV it replaced such that the lowest position was too high. To avoid lowering the mount on the wall I looked for some way to extend the "hangers" and came across this. It was ideal. I mounted each hanger to one of these plates such that the end of the plate fixed to the lowest hole on the TV and the hanger is 10cm higher, almost exactly the distance I wanted to lower the TV. Works a treat and the seller I bought from has a really low price.For information the holes are 8mm and the kit has 8mm screws of different lengths, four 8mm nuts and four 15mm plastic spacers. It also has four 6mm screws, but washers will be needed if these are used.

Our old telly used a Vesa 200x200 mount pattern, this product allowed me to adapt the existing mount to fit our new telly which has a Vesa 300x300 mount pattern.Was very easy to fit with the supplied fittings.Only downside is that it does block some of the cable ports on the rear of the TV, we only use the optical cable one on that area of the TV and it was tricky to get that connected. Not really the mounts fault though.

Simple. Just use 1 of the parts. For me I put 1 part on bottom holes of my 200 x 200 bracket. Top part of my old bracket screws onto TV. Bottom new bit screws into TV. Perfect, easy sturdy. Reviews and questions are nonsense. It works perfect.

Quería poner un ordenador en la trasera de la tele y necesitaba un adaptador.Vis este y lo pedí. Está bien hecho, con buenos materiales y trae toda la tornillería necesaria.Por desgracia tapa todos los conectores de mi tele, así que lo descambié.Muy bien el servicio de Amazon.

è un adattatore che ho utilizzato per adattare un supporto a muro perfetto per un televisore da 26 pollici in modo da supportare un televisore da 40 pollici. tutto bene, è robusto ed adattabile perfettamente. unico piccolo problema: le viti di fissaggio in dotazione non sempre sono utilizzabile sul modello di televisore da supportare e quindi potrebbe essere necessario procurarsi viti adatte allo scopo (nessun problema).

Inherited a small wall mount plate attached to the wall that had to be extended to support the Samsung 49 inch and the larger spaced holes. Does the job perfectly

Conforme au descriptif, de bonne qualité (épaisseur) avec la visserie adaptée pour être lié au support mural mais attention, pas forcément au moniteur TV .

Ottimo prodotto usato su una staffa Meliconi Ghost 220 precedentemente utilizzata su un Philips 37 con attacco Vesa 200X200. Con questo kit ho potuto riutilizzare la staffa su un philips 55OLED854 con attacco Vesa 300X300,