ELEGOO PLA Filament 1.75mm Galaxy Black 1KG, Shiny 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs) 3D Printing Filament for Most FDM 3D Printers

Haven't tried the Silver yet but so far no complaints! Really enjoy the quality on these and awesome to not have it break the bank!

The media could not be loaded. I needed the galaxy black for a specific print (the base of the haunted house in the first picture) and it prints smoothly, with minimal stringing, great adhesion, and looks great.

*Update*Elegoo reached out, unprompted, to apologize for my bad experience and offer a full refund. I really appreciate that, I'll give them another shot.I used this filament in the AMS on my Bambu Labs X1 Carbon printer. I tried several settings but no matter what I used this particular roll of filament always came out a bit stringy. I've not had this issue with other brands. Additionally the color isn't very pleasing either, more of a light but flat gray than a silky silver.I've only bought one roll of Elegoo so I may very well have gotten a defective product, it happens, so I won't slam the product. I'm just going to say "Buyer beware."

Gorgeous! Prints nicely under normal PLA settings, standard nozzle!Here's an example print of F-117 bomber model

It prints really nicely, and the color is pretty, but this is not black. I was skeptical from the pictures and they are accurate. It’s much more of a deep dark blue. Attached photos have the galaxy black I was trying to replicate.

Update: Elegoo reached out to me and offered to replace my filament. They sent it quickly with no hassle. The new filament was much better, so I most likely got a bad batch. I have used Elegoo several times in the past and this was the only one I've ever had issues with. After they replaced my filament, I can't say enough good things about this company.I purchased the Blue Purple Silk filament recently and began printing the day that it arrived. I printed a few small intricate/delicate models that I had printed several times before with other filament. The prints are so brittle that a few times the models broke with almost no pressure just removing from the print bed. The others broke while trying to get the minimal support off. So far, I have not had a single successful, high quality print. I'm disappointed as this is the exact color I wanted.It may print better with models that are not as delicate, but I purchased this filament specifically for this model. I have not tried a sturdier print yet.

I don't know if I got a bad or old spool, or if it's a fundamental problem with this gold silk PLA filament. I had all sorts of problems with it and drying made no difference (shouldn't have been needed for a sealed spool, anyway). I ultimately had to slow printing with it down to 50mm/s and adjust temps of 210°C/60°C just to get a clean-ish print after running calibration routines several times to dial in the settings. Trying another silk PLA from different vendor was a completely different (and excellent) experience despite similar specs. Ultimately I used most of the spool to produce one nightstand organizer which was not shiny despite using mid-range temps & speed. Probably needed to use the slowest speed, the highest nozzle temp, and maybe the finest settings to get good shine? The competitor's product looked great and shiny with the same settings despite recommending an even slower speed and nozzle temp for their silk PLA than the Elegoo.

Elegoo truly makes good PLA that prints great every time, better than other brands I have tried. That said, this last batch of Metallic silver is just grey. I mean, it looks VERY grey almost like a worn version of silver, very little shine too.The previous batch I bought from them was the same metallic silver which is why I re-ordered it again but this last time was very disappointing. I like the company (I have the printer) and I like the quality of the PLA but the color is way off, enough that I don't know if I will be purchasing it again.Picture: The older roll (a month or two ago) is on the left and the newest roll (just purchased) is on the right. I noticed that there was a few days where the silver PLA wasn't available so maybe that was when they switched vendors but yeah, the PLA quality is still top notch but this is NOT a metallic silver.Update: Elegoo reached out and provided a replacement. Exceptional customer service. I am really blown away by a company caring so much about their customer's satisfaction. I just need them to make a 3D printer that does multi-color prints. I am probably going to end up buying the Neptune 4 Max for my next printer.

This was the 2nd filament I bought for my printer, an Anycubic Kobra 2 Neo, and my first time unloading and reloading filament. I had 0 problems with that and didn’t need to change any settings in my slicer (Lychee) from the defaults. I just added supports, brims, etc, as needed for whatever I printed. It’s very vivid and shiny, I’m really impressed and I’ll definitely be using this brand again. It’s quite light and very versatile, but also very beginner friendly. No problems with tangling, breaking or clogging the nozzle. I love it.

What can I say them that

This brand is currently my filament of choice. Once I got it all dialed in it prints so clean and I love it.

I’ve had better luck with the solid colour filament than the silk filament, but all the filaments I’ve tried have worked. Good compatibility with the Anycubic Kobra Neo 2 overall, and the price is pretty good.

Awesome product but being glitter it will do a number to your nozzle if not running hardened steel, keep in mind before buying as youll want a dedicated nozzle or hardened before using