Zodiac R0658100 3-HP Relay with Harness Replacement Kit for Select Zodiac Jandy Pool and Spa Power Control System

Relay was easy to install, works perfectly, and we saved a boat load of cash. Prior to installing this device, we had problems turning the pump system on/off from our interior Jandy Aqualink control panel. System would not come on as scheduled. We had to turn it on manually from exterior/master control panel, and interior panel would not turn it off. This was a bi+¢h in winter, as it effectively disabled the anti-freeze system when we needed it to kick on. Our pool guy suggested we must've input conflicting programs. Wrong (and he's not our pool guy anymore). Pool companies wanted $100 to $300 just to come out & diagnose the problem. So we did our own research and without too much time or effort, deduced the problem was due to a faulty relay - which, as it turns out, is a fairly common problem. It took, like, 5 minutes to install this relay. We just took a picture of how the old one was wired, unscrewed a few screws, swapped it out, and screwed in said screws according to picture. Perfecto. Interior panel, programs, and anti-freeze are all back online :-)

The local pool supply stores wanted two or three time the price, for this relay when compared to the online price. GPS Pools processed and shipped the relay, without any delay. These relays are normally trouble free and last several years. These relays supply power to the pump motors, valves and lights. If the 220 Volt main pump motor shorts out, it may fry the relay. The relay will either be stuck closed, or open. To troubleshoot, go to the outside control box and select the Service Mode. Then press the pump switch. If the indicator light functions correctly, but the pump motor runs continuously, or does not operate at all, you probably have a stuck relay that needs replacing. The relay is fairly easy to replace, but if you don't know what you are doing, call a repairman to do the job.

Worked perfectly and easy to install. If you feel that you might have a faulty switch, try tapping the old one with the butt of a screwdriver. If your pump or feature comes on after you tap it, then this switch is more than likely your problem. It should go without saying, but turn off the power at the breaker before opening the control panel!

Received the product broken. Opened the package and there was a small plastic piece broken off the corner. Upon further inspection one of the other corners was broken and had to be prior to shipping because that piece wasn’t in the envelope. Part should have been wrapped in bubble wrap prior to shipping. Fortunately those Broken pieces aren’t necessary in order for the relay to work. It is doing it’s job.

Bought these for my pool contractor to install, so I have no experience at that. My guy installed a RS-8 Control panel into my original RS-4 Jandy pool control system. Added 4 relays to provide control over 1 new pump and 3 new lighting circuits. All working well.

Fits perfect, much cheaper alternative than the local pool store/repair company. Very easy to install, just make sure to turn all power off at the breakers if you do it yourself.

Life saver as the pool guy wanted extra for the holiday repair just ordered and installed in a few minutes and system is working great.

My Jandy broke down, my pool guy told me to purchase this - he put it in - SAVED $1600!!!!