be quiet!24-Pin 12VHPWR 90° Power Cable 12V-2x6 for use with Any ATX 3 be quiet! Power Supply | Black | BC073

This cable is well constructed and is very flexible. Unfortunately, the 90 degree connected sits too high from the card making it unusable for me. I had to find a different solution, but if you have the room in your case you will not be disappointed I'm sure.

The cable looks and feels premium. My card(4090 Suprim liquid) is mounted vertically and the cable isn't visible at all.

Great price and like most be quiet products the quality is top notch.The cable was delivered when promised...

Setup:Asus TUF 5090 and Be Quiet Straight power 12 PSU.I'm only 1 hour in of usage with this cable and so far, no issues. The length of the cable is not super long but not short either, I believe its 700mm. If your card latch connector is on the top, bare in mind the cable will go downward towards the Fans.The card came with its own 12v-2x6 connector that splits in 4 PCIE but is not angled and still touched a bit the side panel. I'm glad that Be Quiet has this angled connector from their brand and we don't have to rely in third party cables like Cable Mod that sometimes are USD 50+. This new connector has improvements over the previous Gen so I didn't want to use the Cable mod angled connector I had with my 4090.If you have a 4080-4090-5080-5090 card and a 3.0 or 3.1 PSU, make sure you get one of these.Will update further if I have any issues.

This cable is being used in my primary rig. It’s hooked between the BeQuiet Pure Power 850W power supply and an RTX 4080 Super, stuffed into a Lian Li Lancool 205m. The connection on both sides is nice and firm; no wiggle on the video card end.It REALLY helps fit these enormous video cards into reasonable to small cases without having the power cables being crammed up against the side panel.I’d say check if the angle connector works with your card before buying. The power connector on cards can be one of two orientations and depending on the cooling solution, it might not work, or would be VERY difficult to disconnect.It works well enough with the MSi 4080 Super Expert model but the cables out of the connector point up toward the top of the case. If you want a super clean look where they point down, you’ll want to go with the nVidia Founders Edition cards or similar.

Was looking for a 90 degree 12V-2x6 cable to use with my Seasonic Prime TX 1300 ATX 3.0. This has been working perfectly. Cable is high quality and individually sleeved (harder material, not mesh). It’s completely compatible with any PSU that has a direct 12VHPWR connector, which the Seasonic has. I wish it came with cable combs, so I had to buy some to fit this cable since it’s not really standard.

I loved the name, Be Quiet. The Be Quiet for ProArt 4070ti Super GPU the cable made very cleanly look.

It’s definitely an upgrade over the PSU included cable but it’s not as thick or premium feeling as a proper sleeved cable. Also it’s only available in one 90 degree layout making it problematic for 40 series founders editions cards.