ABS Switch Fit for FJ Cruiser 2007-2022 Traction Control - Offroad Switch

The media could not be loaded. Appears to do what is promises. On the early FJ cruisers there is no button to disable the traction /abs systems.This kit provides 2 cables. After an exchange with the company it appears that some years need both, some only need one.In my case I installed both and it didn’t work. Lights all stayed on. I removed the short wire (the one that goes to the blue 4wd computer) and all was well.The long cable plugs into the top right socket on the board behind the driver side kick panel (see picture) and then plug the original cable into the extension, so the switch is now in the middle.On my 2007 fj I found the switch was slightly too wide no modified the hole by trimming the plastic very slightly with a hot file and it fits.I can turn the systems off and on with the switch. I noticed if I go 30-40 mph when the switch has the systems disabled then it stays disabled until turning the engine off and on again. No big deal. Else the switch just switches those systems off and on.Nice neat wiring and the switch feels solid enough. Good for the price.

Switch does not work!! Does not fit a 2013 fj cruiser

Worked great! UNTIL, i found all my lights coming on and throwing a code for the vent valve solenoid. The harness plug that this switch came with took the wire from the VVS and killed the power to it in the charcoal canister. Had to remove the switch to regain power to the vent valve solenoid.. bit worked great for a few days until that code popped up.

The media could not be loaded. I installed both wire's and it didn’t work. Lights all stayed on. I removed the short wire and it work just fine l I did add VSC Symbol - Amber LED CH4X4 Push Switch for Toyota and I'm so happy I can now power brake!!!!!!https://www.amazon.com/gp/product/B01MSJ1Q8F/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&th=1 s

No fit