AmetekLamb Electronic 120V 60Hz Vacuum Motor 116472-13

Set up for double vac system in carpet extractor works great and comparable to original one

Fast delivery, fit perfect. Works good. You need at least half a brain to replace. Anything less and you might have troubles. Need to transplant the metal outlet from old motor so Be sure to seal it good with high quality electrical tape. NOT duct tape. Also clean the screen below the motor real good. Mine was clogged bad and no pets. In the past, I took these blower motors apart and replaced bearings for a few bucks but too much work, just buy the whole new motor and be done.

Worked as should

I accidentally purchased a different model and this one the -13 is the highest cfm and lifts the boat up more quickly. Simple install with a few tools and be prepared with either marine butt connectors or solder and heat shrink tubing because marine environment. Remember to attach the green ground wire to the motor casing.

la Verdad las primeras que solicite llegaban en muy buen estado, pero ahora no se si es tema de la transportadora o las estan envalando con la boquilla vencida las 3 ultimas que he recibido han llegado partidas en su totalidad (la boquilla) o bastante vencidas, que mal por esto dado que las utilizamos seguido y ya no se tiene la seguridad del estado en que van a llegar de necesitar mas

Motor works well. Price through Amazon about half the cost of going through Grainger.Does emit a burning smell when it's first run(for the first 30 minutes or so). I'm guessing its the carbon brushes seating.Other than that, good value for money.

I was shopping a new central vacuum to replace the broken one but turned out that I found it and replaced just the motor. Looks exactly the same as the original part and now it works again. Saved me hundreds of $

When I received the blower the housing is bake-o-lite the box was fine but the exhaust was shattered. I glued it but the tube was out of round. There was zero damage on the box so I'm not sure what happened to it!