ZenCT Tablet Stand Clamp Mount Holder, Adjustable Metal Stand for Apple or Android Devices 4-11 Inches - White

I have this holding an old, heavy Nexus 10 and it is rock solid. It's awesome having my tablet up in the air next to my monitor. It doesn't compress small enough to mount to my glass desktop without some other shim, but I knew that from the product description and specs. Just calling that out here in case someone isn't as diligent in the future.

Seems to be well made. The spring clamp on the device is awkwardly tight and it’s too different to take an iPad Air in and out. It comes with three allen wrenches required to adjust each joint. I wish it didn’t need the wrenches. Thumb screws would be more convenient.

The clamp is just about 1/4 inch too small for my surface pro, which was what I bought it for. I haven't yet found any way to buy a bigger clamp, so I might have to make my own. Other than that the stand seems reasonably sturdy and decently made.

Works great

Solo duro un dia se quebro con una tablet de 10.5 no pudo soatenerla

now my kid can watch the ipad away from him.

Good Tablet Stand

I am using this to hold my tablet on my quilting machine. So far it seems to be okay. It is very well built.

I have a 12.9 iPad and an Air I wanted to have both attached to the wall by my bed as I’m bed bound and use them all day every day to access all my online things like banking, Facebook, Netflix..etc nothing was available to hold the bigger pad, then I came across this handy dandy gadget! I order 3 after reading about the build quality and the way it clamps onto shelves and desktop or wherever!I was excited to finally having found a solution to a very annoying problem! Old holders have left big holes in my walls, the build quality meant they broke and needed to be replaced more than twice a year! Then this came up, the fact it held the bigger 12.9 iPad sold it to me right away! Finally I could use my big pad hands free, being disabled with limited use of my arms and hands meant I could not bear to hold them for long, with this all problems were solved the moment it was clamped to the shelf! I have the big pad clamped to the upper shelf and the small to the lower, and my husband was so impressed he bought one for his bed side. They took minuets to install and come with Allen key to tighten up the joins for perfect stability. The parts are metal not flimsy plastic! The clamps that hold the pads are strong and easy to use for getting your pad on and off... hardly and shake well typing. I’ve marked it down by one star as stability with the big pad is not so good, and we had to tighten everything really tight to get it to stop drooping, it’s fine now but don’t want to turn it much incase it goes loose again, but it’s holding up fine, been using for just over a week and I’m so happy with them. You get what you pay for, these even have after care and a parts department how long that will last hard to say, but talking from experience of many many wall and shelf brackets for iPads this has beat all hands down, they even look aesthetically pleasing! Don’t think about it just buy before they run out, as this will change your life if your looking for the ultimate holder for your pad, and there is not one position that can not be reach with a bit of a tweak!😃

Je l'ai acheté il y a cinq mois et depuis sa réception j'en ai fait une utilisation intensive quotidienne avec mon smartphone. J'étais totalement ravie jusqu'à ce qu'il commence à prendre du jeu au niveau de l'articulation la plus proche du pied, celle qui oriente la hauteur du bras. Du coup avec le poids de mon smartphone le bras piquait du nez, ce qui à la longue est super agaçant. J'ai commis l'erreur de resserrer la vis qui se trouve sur le côté de cette articulation, ce qui la rendait légèrement plus résistante mais elle reprenait de plus en plus rapidement du jeu. Au final après avoir démonté plusieurs fois cette articulation, essayé de rajouter différentes rondelles à m'en arracher les cheveux, j'ai trouvé la solution dans un commentaire : la vis de réglage de la résistance de cette articulation se trouve en dessous... Il faut dévisser le pied entièrement pour accéder à cette vis, qui se trouve au centre d'une pièce métallique de forme triangulaire. Et voilà, problème résolu... Je poste ce commentaire pour vous éviter de vous arracher les cheveux comme moi devant ce problème que j'ai pris pour un gros défaut de conception qui au final n'en est pas un. Comme je n'ai pas gardé la notice je ne saurais dire si ce réglage y est indiqué mais logiquement il doit y être. En tout cas je trouve ce bras articulé vraiment parfait du coup. Après cinq mois d'utilisation intensive je suis pleinement satisfaite. J'avais pris le temps de comparer des tas de produits similaires avant de faire mon choix, et malgré le prix que je trouve un peu élevé je trouve que ça vaut vraiment le coup car il est finalement très bien conçu, très pratique et je pense qu'il va me durer longtemps encore car les matériaux me semblent de très bonne qualité.

I purchased this stand to use with my iPad Pro 12.9 mainly for art and drawing.Initially the stand would not support the weight, the lower arm pivot joint just kept falling not tight enough, so I tightened the Allen screw on the pivot thinking that that was for tension but it made no difference. So I contacted the seller and was told to refer to the picture which I have included. The tension is adjusted under the arm which I thought was for the swivel tension not for pivot up and down.Anyway after tightening the screw my iPad is very sturdy and stable... perfect.I think buyers are overlooking or not being aware of this tension adjustment, and as a result think that the stand just isn’t good enough for there needs, but like I have said it supports my iPad Pro 12.9 no problem.Excellent product and excellent customer service 5*.

Good quality solid and sturdy metal stand.I've had a few of the plastic "goose neck" stands in the past and they didnt last, this stand, while a little smaller in range, is solid metal and thus much more solid.The stand arrives complete, all you need to do is screw the mount piece into the end of the pre-assembled arm's.For phones and small items there is a space in the stand ends to allow a power cable to be passed through, for larger items placed horizontally in the stand this is not required.You can see a Fire 7inch tablet mounted in my stand in my photos.Feel free to ask any questions, genuinely very pleased with this purchase, if you find this review useful please mark it as such.

Its sturdy and feels nice but I would NOT put larger tablets in it. It has cracked the screen of my surface pro 6 (through a screen protector) and I can only put this down to pressure of lack of padding as I was careful putting it in. If you have an iPad mini or something I'm sure it will be perfect but I wouldnt risk my tablet for it. (Absolutely gutted)