LIGHTENING DARK 10000 Lumens 9006 LED Headlight Bulbs,CREE Chips Conversion Kit,6000K Cool White - 360°Adjustable Beam Pattern

SAY NO TO 9006The 9006 from this seller were really9005 with over sized O-rings to makeUp for the size differences. This is not the correct specifications P22dFor the bulb. The bulb is bright and works but until they correct theCap(base) you may have issue with the 9006 version. Do not try o-rings from old bulbs as they be lose and allow moisture in.

I tried to install it in my Jeep and the problem is the height of the housing above the o-ring is too long and this prevents you from twisting it into the housing of the light. I looked at the OEM light and the height of the housing is 10.39mm, but this housing is 12.23mm. Those 2mm make all the difference. I considered sanding down the height but I also noticed that the locking tabs would prevent this light from being orientated at the 9 and 3 o'clock position (See tab orientation compared to OEM). Support has been great, but this didn't work for me.

I have a 2005 motorhome and the stock headlights sucked! I replaced with LED lights and they were better but the light pattern was terrible. I then went back to to some "high power" standard halogen and they were worse. I saw these lights read some reviews and I thought I would give these a try. These are extremely bright and the light pattern is better than the last set of led lights, still not what I would like to see. The only problem I had was I could not get the low beams into the housing, took the o-rings off the old lights and installed and they fit.

Fits easily in 2009 Mitsubishi Outlander. Needed to loosen the metal bulb retaining rings on the back of the factory headlight housing to fit these bulbs plastic locking rings, but not a big deal. The plastic locking rings that came with the bulbs are just a bit thicker then the halogen bulbs they replaced.OMy only problem is when DRL's are on, you can see them flickering with your peripheral vision. Not much difference between DRL's & full on in my vehicle with these bulbs.

These are a decent upgrade but I would spend the extra money on a better brand if you want them to be reliable. I've had mine less then a year and one has died already. With the way these are designed it's not a surprise, having the driver inclosed in the bulb itself instead of having it separated is a poor design. The heat from the bulb will kill the electronics in the driver therefore killing your bulb. I've upgraded to the gtrlighting ultra 2 which aren't comparable in price but the quality and build is superb compared to these bulbs and with a lifetime warranty the extra money feels well spent.

Bought this brand for my Mitsubishi lancer 2009. Amazon said that its the right size and also checked my old stock lights and its the right bulb 9006. But as i was installing it, the plastic lock wont lock it just keep twisting around the area. I was disappointed that happened, the product didn't come broken, i think the plastic lock doesnt match with what i have on my car. So i returned this product and bought another brand hoping its the right fit. Although my dad bought the same brand for his Camry and it fits, just plug and play.

I ordered two pair for me and my daughters vehicle in February. My procrastination didn’t attempt to install them until this week (December) and low and behold both pair are wrong! I ordered 9006 bulbs for my 2002 Trailblazer and I received 9005 bulbs. They will not fit although technically they still should but the socket is too small. My daughters Hyundai takes an H11b and i received a pair of H4. Reviews were terrible on this product and seller but I proceeded anyway. A waist of $109

This product wasn't a simple R&R.The plastic mount is thicker then OEM and I had to loosen the mounting screws to allow for extra room for the mount to fit.Nothing is every as easy as it should be.