White Digitizer Repair Kit for iPad 9.7" 2018 iPad 6 6th Gen A1893 A1954 Touch Screen Digitizer Replacement with Home Button + Tools

Fast delivery, carefully packaged. Goods as described, good quality.

Functionality: So far so good with the digitizer, no dead spots. 10/10Installation: Nice to see all the tools included and install was easy 10/10Durability: Glass seems thin, but as expected by price. 7/10Value: Great price 10/10Fit: Screen fit perfectly. 10/0

My second time buying this screen replacement and it’s very very fragile. I’m not sure what it’s made out of but it doesn’t last even in an otter box. One drop and it’s shattering, I thought maybe the first time was just a dud but I haven’t even had the second one for a month and it’s completely shattered. At this point I’ll just go to Apple.

Plenty of videos out there that can show you how to do it. Definitely not a beginner project. Wish the newer iPads could be fixed for cheaper.

The instructions were really annoying to read. We watched a few YouTube videos and followed those instead. Honestly much easier to understand.We watched about 4 or 5 videos and not one of them said to unplug the battery (the instructions do). It is very important that you do so or you could blow a backlight fuse. I feel like the instructions should list this in big bold red letters.This took us about 3-4 hours to do from beginning to end. The first hour was spent trying to get the screen off. It was so badly shattered that we had to keep flaking off small pieces and it took forever.Then we took our time disassembling it because we didn’t want to mess anything up.After doing one, I bet it could be cut in half the time or less.The screen has weird lines in it when it’s off, but I don’t notice it while it’s turned on.It’s been replaced for about 5 days now and it works so great!There are no ghost touches or any sign of delayed or sensitive responses.I took my iPhone to a store to replace a broken screen and it is so sensitive and it drives me crazy. I paid way less for this iPad screen (of course having to do it myself), but this screen works way better than the replacements at a repair shop.I’ll update if anything changes, but so far so good!!

This glass and touchscreen replacement does the job, but it's definitely not an easy task. Note the pre-installed button makes things a bit easier, but if you want to your touch ID to work, you'll need to preserve and use your old button (and swap it with the one attached to this new glass).The two major difficulties I found in installation are these:1. Removal of the original glass is always difficult. This isn't a problem with the replacement glass, but an unavoidable property of the iPad. Wear safety glasses, and wear gloves when removing the old glass.Cover the entire original screen in tape to prevent glass bits from going everywhere. You're probably going to shatter the old glass. This isn't a big problem, but try not to damage anything else in the process. Watch a YouTube teardown video-- maybe a couple of times. Finally, after removal make sure to remove all bits of old adhesive and tiny bits of glass where the new glass will contact-- THIS IS CRITICAL. Small bits of glass in the old adhesive will create pressure points that will break your new glass after all of your hard work.2. Here's where some product difficulties come in: The new glass has plastic strips that need to be peeled off to expose adhesive that holds it in place. Some of these strips are around the fragile ribbon cables, and there's also a large sheet of protective plastic that needs to be peeled from the back of the glass during installation. You must keep even the smallest bits of dust off of that surface while tilting the glass into place while getting the ribbon cables to tuck neatly inside the iPad.THE CRITICAL PART HERE: prep the new glass before plugging in the cables by carefully removing the (probably blue) plastic strips from the edge adhesive. Then remove the adhesive protection from the cable going to the button. Stick that button cable to the surface-- you will probably need to lift the edge of the large back-of-glass protection sheet where the button cable lies (DO NOT STICK IT ON TOP OF THE PROECTIVE SHEET). Stick it down, then let the back-of-glass protection sit back down on top of it.The ribbon cables themselves have some (probably white paper) strips covering their adhesive. Do these next. Remove the strips, but BEFORE FOLDING THEM ONTO THE SCREEN BACK SURFACE lift the edge of the large back-of-glass protector so the ribbon cable pieces can stick into place (they MUST NOT stick to the back-of-glass protector sheet that you remove just before you fold the glass into place). Be very careful, as the adhesive section of the ribbon cables must stick very neatly and flat onto the back of the glass in order to fit well. IT IS VERY EASY TO TEAR THE THE RIBBON CABLES NEAR THE ADHESIVE SECTION. If this happens, portions of your touch screen may not function.Once you've stuck the adhesive base of the ribbon cables into place, carefully plug in the cables, plug in the screen and replace the 7 screws (3 tiny ones in the metal plug cover on the display cable, 4 larger ones on the corners of the display panel). You'll need to be holding/leaning the glass upright (approx. 90 degree angle from plane of iPad-- don't lie 180 degrees flat-- bad for cables). Have the iPad lying on a table with a small box or object to lean the glass against.CLEAN OFF ANY DUST SPECKS on the back of glass and display surface, then fold the glass into place. Do not force anything-- you'll just shatter the glass. Be patient. 10 minutes here will save you a couple of hours redoing the entire thing.DO NOT apply pressure at any particular point on the glass-- apply pressure over a large surface to get the adhesive to stick in place. Pressing the entire iPad face-down, gently, on a firm surface that won't scratch is best. A firm rubber matt or cardboard will work. Make sure there is no dirt, grit, or bits of glass on that surface, and make sure your glass is lined up and is seated within the aluminum border before pressing.I'd say expect about a 50% success rate if you're fairly careful and experienced with this kind of work but don't replace screens regularly (which is my case-- I've done this a few times, but not regularly). Don't rush. Don't tear the ribbon cables. Clean the edge contact surface well. Don't drop your sharp tweezers on the lithium battery 😁 (not kidding).

Item came almost a week sooner than expected & was exactly what I expected!

the replacement item looks great everything in the picture came in this package , when replacing the new one it didn't work i was suprised then put back the old one and the ipad turn on , then i though maybe something was loose . put new digitizer replacement back and my ipad died for good , .:( so sad checked the 3 small connector and everything looks good dont know what happened :(