Item Package Quantity:1 | Size:100PSI USA SupportUSA BrandUSA StockUSA ServicesDial Size: 2" Dial Size (Crimped Casing) Accuracy: +/- 4/3/4% Scale: Dual Scale - PSI / Bar Movement: Copper Alloy Bourdon Tube: Copper Alloy Window: Glass Case: Steel case for protection in harsh environments Connection: Copper Alloy Center Back Mount; 1/4" NPT (for 2" dial) Normal Ambient Temp.: -4F to +140F (-20C to +60C)
R**C
Only readable when compressor shuts off.
Your browser does not support HTML5 video. I replaced one air gauge on the tank on my nail gun compressor. This 2” gauge was a little bigger and only went up to 160 psi. (Replaces a 1.5” gauge 0-200psi) but since the maximum air pressure is 120, I thought this one would work better. Immediately I noticed the needle vibrates back and forth, it gets really bad when near 120 psi. The one on the air regulator is smooth from start to finish. So the only time you can read this air gauge accurately is when the compressor is not running. Also it can be as much as 20 psi off when the compressor is filling. At least it will do the job, but must be poor internal workings to shake so much.
T**.
Very questionable accuracy, quality and durability - of 2 purchased one broke after 5 min use
Purchased these to check the pressure on my inflatable kayak.Since I have 2 adapters I purchased 2 of them.Straight out of the box:One doesn't go down to the bottom of the range with no pressure appliedThey are 1.1 PSI different in reading when the measured pressure is between 2-3PSI (don't know about when higher)The other one died (won't read any pressure) within 5 minutes of first use.I will be sending them both back.
R**T
It works fine
I have four of these, two in 100, two in 60psi, and they all read the same at the same psi and all work like they're supposed to. Mine are used for water in a DI/RO system. Also; one of my 100psi gauges is usually off (0 psi), but when On it's about 120psi. This hasn't affected its accuracy and as it still reads equal to the others. The pressure is pulsating water from a diaphragm pump so the needle is always fanning several psi. Point being I'm asking a lot, for 8 months, and so far so good.
D**S
Good value.
I bought this to install on the pressure regulator for my 2 stage compressor. I didn't want or need the liquid filled gage since it was not going to be subjected to the pulses of a running compressor. Gage responds smoothly to my air use, Easy to read dial. I don't expect to me moving it off the 90-100 lb setting,,,so can't comment on other pressure accuracies. . 5 star review for now... I'll post an update if that changes
D**D
Wasted my time
This item was not what was advertised. I ordered a 1/4" npt gauge. What i received was a 1/2" ntp. It was promptly returned. The box it came was marked correctly but the acual gauge did not match the label or the product description. If i could give no star i would.
R**Z
Good little gauge
I borked the one that came with my regulator (not enough wrench flat to tighten it properly). This has plenty and no leaking. Obviously not calibrated but seems right enough for my garage.
H**W
Ok
Very sensitive working parts are not going to hold up in my Techs vans. Some of these gauges broke just handling them to assemble pressure test set ups for testing DWV piping.
T**N
Great value for money
Nice gauges. I tested two of them together and they read the same as my master gauge and agreed with each other. No rattles, no leaks. Easy to read. I like them.
Trustpilot
3 days ago
1 week ago
