Schneider Electric GGBL1032BSS Lisse Screwless Deco 10AX 3G 2W Switch BSS, 240 V, Stainless Steel

A lovely, well made switch from Schneider.For those not in the electrics industry, Schneider have a very good reputation, for solid reliable equipment.This is technically an intermediate switch with 4 terminals on the back.However, I bought it to just use as a straight forward, 1 gang, 1 way lighting switch with a switched line at the back box.To do this, you use the top 2 terminals, labelled COM and L1. It doesn't matter into which terminal you put either cable. It will work the same, both ways.It does come with a useful instruction sheet, for all of the Schneider Lisse range, which has diagrams on how to wire up, for different uses, such as 2 way switching etc.As ever, when it comes to electrics, if you are not 100% sure of what you are doing, than get someone in who is.If you have a neutral in your back box, you don't need it for this, so leave it unconnected (but hopefully, sealed off).As this is a metal switch plate, it does need a CPC ( earth) connection. This should be connected to the single brass terminal on the back of the switch.If you do not have a protective earth on your lighting circuit, then you must not fit metal switch plates.Fitting itself is very easy. Just pop the front off to reveal the plastic face plate. (I used a small flathead screwdriver to lever it off).Then connect up as required, (it says TOP on the front, to stop any confusion).It comes with standard fit 3.5mm screws to secure to your back box, but, they are rather short (18mm), so you may find you need to use your existing screws.Then, once fitted just push the face plate back on, for a lovely smooth, neat finish.The switch is 85mm square in size, as many modern ones are. This is slightly smaller than the older style, and as can be seen in the photo, it can show your painting up if you painted after fitting switches.In use, it has a very nice, satisfying 'click', and as previously mentioned, with its flush, screw less finish, looks very modern and smart.I am happy to recommend this switch. Yes, it is a little more expensive than many, but it does have the quality that I expect from Schneider, and should last many many years.I hope you found this review helpful.

The best sketches ever ! Had different types before but ended up changing all to this type . Just great, and quality is great

Better quality than others and good design - best not to over-tighten the box screws as you will distort the face plate and the cover will not fit.

This Schneider Electric Lisse Screwless Deco switch delivers a clean, elegant finish that truly elevates any interior. The stainless steel faceplate paired with the black insert gives it a premium, modern aesthetic that works well in both contemporary and classic settings.Installation is straightforward for anyone familiar with basic electrical work, and the screwless design means no visible fixings—just a smooth, flush finish against the wall.Pros:Sleek, screwless stainless steel designSmooth 2-way operationDurable and high-quality materialsEasy to clean and fingerprint-resistantMatches other Lisse Deco fittings for a uniform lookCons:Slightly more expensive than standard switches, but the quality justifies itMay require a deeper backbox depending on wiringIf you’re upgrading your switches and want a stylish, robust option with a luxury finish, this model from Schneider Electric is an excellent choice. Highly recommended for modern homes and renovations!

Great build quality and easy to install. The manual is very busy, but if you're stuck there's a lot on the website yo help out. The finish is excellent, though as it's chromed, it leaves fingerprints, which a simple wipe will remove. 5 stars.

it is a great product

Good quality item- feels robust and that it’ll last

Easy to install and to decorate round with easy clip front. Nice firm click on use.