UL Listed Full Motion TV Wall Mount Bracket for Most 37-86 inch TVs, Swivel Tilt Extension Level TV Mount, Max VESA 600x400mm, Holds up to 132lbs & 16" Wood Studs with Hole Drilling Template

My new TV is much heavier than other LCD TVs I've owned due to its massive 100" size. It weighs over 100lbs and I wanted to make sure it stayed on the wall. I also wanted to make sure it was as close to the wall as possible. This mounting kit is strong and has thicker metal than kits I've used in the past for smaller TV's. The kit included lag screws for mounting on standard wood framed and drywall type walls. I located the wood studs and mounted the base bracket. The kit included a thick paper template and simple level for locating and marking your holes so that you don't have to hold up the heavy bracket itself and I found that quite handy. I was able to tape the template up and view it, making sure it's where I wanted it. The TV brackets were also simple to install. My TV has an uneven back but HiSense put a VESA spacer on the thinner part of the TV to make it even for brackets. If your TV doesn't have this, the kit includes multiple M8 screw lengths and plasctic spacers for getting it right. I used a couple saw horses to rest the TV on next to the wall before the final lift. The TV was heavy even for two people. Engaging the TV hardware to the wall hardware was straightforward and not much different than hanging a painting. Once the top was "hooked" on, the TV snapped into place as the bottom "hook" mechanism engaged, preventing the TV from casually coming back off the wall. One thing I noticed is that for a 100" TV, the pull cords that release the bracket when you need to remove the TV from the wall, were rather short and the wall gap was not enough for me to get my hands up in there. You might want to lengthen the lanyards with strong twine or in my case, some long zip tie loops. Sliding the TV side to side to adjust the center position was fairly easy with a little force after it was clipped in. Overall, this is a good and sturdy kit for larger TVs and IA found the price reasonable and economical when compared to other choices I had while looking for a mount kit.

Great Mount. Used this to mount a 100'' Hisense U8 4k TV that weighs about 157lbs. I was a little worried about it being able to handle that heavy of a tv but it is holding no problem. Very well made. Easy to install. Directions are simple and straight forward. 10/10 would definitely recommend.The only feedback I would give is the locking tabs on the bottom should have a ramp to them. So when you hang the tv on the top bracket the bottom snaps in to the locked position. The way it works now is you have to pull down the locking string to unlock the tab then push in the bottom of the TV. Makes it a little tricky with a 150+lb TV and not a whole lot of room to grab the strings.

Bought this for our 98" TCL, it works perfect and allowed for a great setup. Very easy to mount. I recommend buying a good stud finder, once I bit the bullet on that, this took less than 5 minutes to set up and mount (there were 3 of us total, two with the TV and one helping guide).

At first I was scared cause I read about bigger tvs on this mount but it has held up so far , it was a easy assembled

I really love it easy to put up, but the screw should not be that long to where they bust through and mess up the flatness of the surface

Great value and easy to install. I love the tilt and that I can see the TV from anywhere in my room if I need to move the screen.

Excelente producto, de muy buena calidad, económico y con muy buena durabilidad, fácil de instalar muy fuerte

Has great range! I love that I can tilt my tv and rotate it easily to be wherever I need it. It’s sturdy and easy to use.