Mouse Skatez/Mouse Feet for Logitech G700 / G700s (2 Sets of Replacement feet)

I have had my mouse for some years now. I came across these on Amazon and decided to give my mouse a treat! The original 'feet' on the mouse peeled off without a real problem, and any residue left can be cleaned off with the supplied cleaning pad. Fitting the new 'feet' is a breeze and yes, it does make a difference to the mouse. It glides along more easily and as you get two complete sets in the package, I consider it very well priced.

Fit my mouse. Was cheaper than buying a new one.

Purchased these mouse feet for a Logitech G700s I've had sitting for a while. I had to use the mouse at my office and the feet are great. The mouse slides very easily and is a great upgrade.

These rubber feet are identical to the original, I installed the first set about 4 months ago, they were very easy to install and worked as expected, the only thing I would like to mention is that one of the feet came a little bent, so the packaging of the product should be improved, however, once I installed the rubber feet, the adhesive was strong enough to lay flat under the mouse. I would recommend this product.

After repairing and replacing microswitches on my G700 mice (mouses?) a few times, the mouse pads need to be replaced and these are a perfect fit. I see people claiming these feet are thinner than OEM (eh, not really; in actuality they seem to be thicker but I'm not motivated enough to break out the calipers), and I see others claiming these feet do not fit the G700s. They are a perfect fit; if you look at the one to the left right of the mouse (to the right of the power switch when looking at it upside down), and compare to the one at the back (toward you, along the battery door), you'll see that these two feet look very similar, but are not identical. The one by the battery door is slightly larger than the one by the power switch. It is easy to confuse the two because the size is so close.What I do is clear the mounting point with 99% isopropyl, let it dry fully, lift the foot off the backing paper with tweezers, drop the long edge against the mouse to align it with the embossed mounting point, and once I have it aligned gently lower it with the tweezers, verifying alignment. Once I have it aligned, I drop the pad onto the mouse, and if it's aligned properly, I then push it down gently with the tweezers, flip the mouse over and push down while moving the mouse in circles, then pick the mouse back up, turn it over, and massage the pad to heat it up a little bit to ensure a better bond.

Got my mouse flowing again.

The Logitech G700 is for me, the best mouse in history. Shape is perfect. Perfect. I am a woman with small hands, and normally mice are too big and shaped all wrong. 6ft tall men are not the only people who use mice. This is not a small mouse, but the shape is both simple and elegant- fits me perfect. However, mine is many years old, I have no idea how many miles it has traversed at this point and it was dragging a bit. I am not getting rid of it till it DIES. Yes I have a G503 (two of them) but this is IT. So I bought this kit, hoping it would bring back the easy flow this magic mouse used to have. YEP it does. Took only a few moments to peel off the old pads, clean up the underside, and slap these on. And I have that second set for next time.

This review is for the pads sold by LZYDD StoreNot much is good so I'll start with the cons.Cons:- Thinner than OEM by about 0.1-0.2mm. They may seem as thick as OEM; but after you peel off the protective film, they are not- Pads are uncut and smaller than the recesses. It leaves are relatively significant gap- Soft plastic material. Flexes easily on installation compare to OEM- Does not glide smoothly (higher resistance) on either hard (3M) or soft (cloth) mouse padPros:- Adhesive holds well; pads have not fallen off- Better than a completely ground down set of pads- Likely designed to work on top of a set of worn down pads; not as a replacementI purchased pads from other sellers that are significantly better. They are a couple 0.1mm thicker than OEM and made from two layers of different materials. A bottom layer that is stiff and a softer top layer. This is different than the OEM pads that are simply made from the softer material. I assume the second (stiff) layer is to create the feel of OEM but with a slight increase in elevation. However, these pads are made from a softer thinner material than OEM-- disappointing.