Teslin® Synthetic Paper - for Inkjet Printers - Micro-Perforated 8-up - 10 Mil | 100 Sheets

bought this as a test pack for some convention badges. Worked exactly as expected. Though we had to do some hand holding with the people at Staples Copy and Print center because they weren't comfortable with using an unknown paper product. Then we played with laminators.Held the colors very well, paper stayed bright through both color laser printing AND lamination. Pulled apart into 2 layers when we tested the lamination removal. Went back and bought an additional ream and 25 sheet pack of the paper later to make HUNDREDS of badges.Only wish is that it came in a larger perforated sizes. 3" x 5" would have been perfect and saved us hours of prep time.

Pros:1) Material is very Laser Printer-friendly. No warping or smearing on two models I've used.2) Material is very resilient. Hard to tear.3) Material bonds *very* well when sandwiched between a butterfly lamination pouch. Really impressed. (I used the 10-mil Matte Butterfly Pouch)Cons:1) Some pre-punched cutouts ARE NOT square with the sheet. Some cutouts aren't even rectangular in the geometric sense, with uneven edges.2) Some sheets have offset cutout placements versus others, rendering them useless with a template.3) Most of my cutouts have one side that is offset ~1.45in from one edge, and 1.25in from another. This means you must measure every sheet so you can feed it properly.4) The pre-punched cutouts, when torn out, leave plastic burrs along the edges. The burrs must be removed if you are to make them align fit in the butterfly pouches.In hindsight, I have to live with this product... I do not want to use a full-sheet to only make a couple of cards. If a 4x6 blank (no punch-out) product existed, I would gladly use that and acquire a die punch. It would produce much cleaner cutouts.

I received this item which is top quality by the way within two days everything was as promised, and was extremely well packed.

This paper we use to laminate for employee badges. It comes already perforated so once you print it, you will not have to take scissors to it. It's virtually indestructible and that is before it is laminated. Once laminated it will last forever. The print quality I change to high quality on my ink jet and the photos come out crystal clear. Will definitely buy from this company again.Also, the paper you can print on either side so badges with a back and front are a breeze to make.

Worked as advertised. Printed clean from my color laser printer. I will be using these again in the near future.

So I have a very nice laser printer, I contacted support for these sheets, they sent me some print instructions and they still printed extremely light and blurry, the ink would smudge, not sure why they did not work on my laser printer. Too expensive to not work. I'm not a happy customer, I've requested a return for these sheets. I don't need them if they can't print the headshots right.

The product is good. But its TOO expensive not to come with clear instructions. waste alot when printing because its tough to line up. if it came with instructions id give 5 stars

I've used this to print IDs cards from a laser printer. Works fine and does the job. Would be better if the company provided a digital template. Without a good and accurate template your cards will end up misaligned.

This is standard Teslin. I like it. Thanks!

5 stars from my side....

Fast shipping, product as described. Very happy