DROK AC Voltage Amp Display, Digital Voltmeter Ammeter Multimeter Panel 500V 200A Voltage Current Tester Meter, LED Display Volt Amperage Reader Gauge with Current Transformer CT

DROK AC Voltage Amp Display, Digital Voltmeter Ammeter Multimeter Panel 500V 200A Voltage Current Tester Meter, LED Display Volt Amperage Reader Gauge with Current Transformer CT

Q: Can this be installed at a breaker box on a 200amp main breaker?

Yes, sort of. You will need 2 meters with their respective current transformers (those black donuts). One donut for each of the main power wires coming from the meter. Since these donuts aren’t split, you will need to disconnect the cables while still live, unless you remove the power meter. Total power used is the sum of the meters. Basically, you will need an electrician. Or you could by the MTP 3100 or equivalent. It comes with 2 current transformers that are split, so that you open them, slide on the cable, and then close them around the cables. No cutting or disconnecting power. The current transformers are connected to a wireless transmitter that transmits to the base station which sums up the power consumed/cost per hour based on your kWh rate and weekly consumption graph from the 120V and 240V loads instantaneously. There is also a cable and software to connect to your PC.

Q: Power source? Does this run off the power of the circuit being tested or does it need a separate power source? Is it "self powered"?

It probably can but if you look at the images posted by the seller, it has a wiring diagram that says "Use isolated power source" for the meter's function. Probably because the meter measures 0-90VDC but is only able to handle a 0-30VDC power source. The last image has a very clear wiring diagram that's easy to red and understand from there on out though. Good luck.

Q: I need this meter to measure ac volts and dc volts thanks

No - it only does AC volts and amps. You likely need 2 individual meters.

Q: The paperwork doesn't show the cutout size. Does anyone know how big the hole needs to be?

Dear customer, Cutout size is 68mmx37.5mm Best regards, DROK

4.3/5

Product ID: 586851062

Secure Transaction

Details

Brand
DROK
Power source
Corded
Style
Digital
Colour
Black green
Item weight
0.05 Kilograms

⚡AC 130-500V

💡0.39'' LED Display

🔋0-200A

Frequently Bought Together

DROK Volt Amp Meter, AC 500V 200A Digital Voltmeter Ammeter Panel, 0.39 Inches LED 2in1 Multimeter, 2-Wire Voltage Amperage Tester Gauge with Current Transformer

Ogrmar Plastic Dustproof IP65 Junction Box DIY Case Enclosure (8"x 6"x 4")

DaierTek 30A 250V KCD2 KCD4 Rocker Switch DPST 4 Pin Red Lighted 120V Rocker Toggle Switch ON Off Heavy Duty T125-3Pack

Description

🔍 Measure with Confidence: Your Go-To Voltage & Current Tester!

SAFETY FIRST - Enhanced back cover design for secure usage.
VIBRANT VISUALS - Color-coded LED display for instant clarity.
EFFORTLESS SETUP - No extra power source needed—just plug and play!
CALIBRATION MADE EASY - Built-in trimmer potentiometer for hassle-free adjustments.
PRECISION MEETS PERFORMANCE - Experience accurate readings with a wide voltage range.

The DROK AC Voltage Amp Display is a versatile digital voltmeter and ammeter panel designed for precise voltage and current measurements. With a measurement range of AC 130-500V and 0-200A, it features a vibrant 0.39'' color LED display that shows voltage in red and current in green. The device includes an external current transformer for easy installation and is powered by the circuit being measured, eliminating the need for an additional power source. Its built-in trimmer potentiometer allows for easy calibration, while the enhanced back cover ensures safety during use.