LOTOSLTPDC2000D 2024 Upgraded 3 in 1 Plasma Cutter TIG Sitck Welder Combo, 5/8" 16mm Clean Cut 3/4" 20mm Severance Cut 50A Non-Touch Pilot Arc Plasma Cutting Machine, 200A Tig & Stick Welder, Brown

I have worked in the industrial maintenance field for 30 years and have a shop at home. I was really wanting a plasma cutter for home and was searching the internet and found this machine. The reviews were mixed but for the price I thought I would give it a chance.All I can say is WOW. It has paid for itself over the years!I have used it now for 3 years and have no complaints. As a plasma cutter it is as nice as the hypertherm I have at work. I have had no problems cutting up to 3/8" steel with it. The leads are a good length and can handle a lot of cuttingThe arc feature works good too. The duty cycle is a little low for big, high power jobs but it works great!The tig feature works great for small jobs.There is some limitations to this machine... it only really works good when running 220v, it works ok at 110v but really doesn't have the punch to do much work.The arc leads are small, short and not made for a lot of work.Overall it has been one of the best investments in tools i have ever made. If it died tomorrow I wouldn't be upset.Update- 5 years now and it still works great! It has hundreds of hours on it and still good a new! Great machine for home shop or farm! I have ran this with my portable generator for field repairs and it works great!!!

I got a lot of use out of this product for a couple years and then ran into a problem with the circuit board. I emailed the manufacturer and after sending a few pictures they sent me a brand new machine. That was 3 years ago and the Machine is still running perfectly. I use this machine to build my own portable, trailered CrossFit rig so I could work out anywhere. I cu a lot of metal and stuck a lot of metal together with this machine. For all the processes you get, it is well worth the money.

I purchased this welder/plasma cutter about 4 years ago and since then it's done what I need it to. I am an armature maker so it gets used for a whole day about once a month.While the manual was a little light on details, the welder was easy enough to figure out (it was not my first time with a TIG). I had trouble using the plasma cutter. It was my first time using one, so that might be the issue tho. In case you're struggling there, start with low amperage (8 amps) and lower air pressure (30 psi) and go up on them until you're cutting through the material. If you start with either too high, the machine may abruptly shut off.The welder is all that I need it to be. I've made consistent, strong welds with it. The max of 200 amps is more than I need. I mostly work with 16g steal tubes, but I've also welded 3/8 steal as well. As mentioned earlier, this welder has been working for me for 4 years without any significant issues except for some small things noted later below. I purchased a foot pedal which should come with the tool, if you ask me, as that's the only way to modulate the power while welding.I've used it on a standard 120V outlet and a 240V dryer outlet. It is much happier on the 240V; that's the only way to get higher amperages (100 plus I think) and the electroncs just seem to work better there too. Additionally, after using it on the 240V for the first time the mode selector switch stopped working on 120V. It needs a lot of persausion to switch off of plasma cutter mode at 120V now, of it will even do it at all. I only use it with 240V now but I could see this being a big issue for others.Another complaint is the shortness of the ground cable. At about 4 feet, I have to move the welder pretty close to what I'm doing, which can be annoying.I've not tried the stick welder so I can't report on that.All in all, it feels like they went cheep on the unimportant things and made sure the important things work as they should. I would buy this again and expect simple but reliable functionality.

Certified welder mig/tig and stick. My honest opinion straight out of the box I was hesitant for how light the whole machine was. No instructions were necessary for installation of hoses, adapters torches etc..for everything is fairly cut and dry. So here are my unbiased opinion(s);Cons: I didn’t care much for the 30 amp twist connect prong plug at the end of the whip. I removed this and added a 50 amp 3 pole connector. (Lincoln plug) no big deal just didn’t fit my shop outlets. Second, I didn’t care for the 1/4” hose barb adapter on the rear for your comp air and argon connection. I removed this and added a 1-4 male npt threaded adapter and also installed two ball valves on a tee for faster air to argon change over. Then I put quick connect air chuks coming out of the ball balves. Attached an air chuck to the provided hose for the argon(which I cut down and use my 500psi fire rated air hose mainly for the plasma cutter). No big deals really just suites my faster paced commercial worksite in the shop. Not being negative towards these things but wasn’t my preference so no loss of starts there. Thirdly, the argon gauge worked perfectly but is a bit soft and on the cheaper side l. I get this due to the amazing low price of this machin so no biggie. I used my own gauge and regulator. Again, nothing wrong w product just not my preference. Lastly, I don’t like how you have to run the argon gas thru the machine and use the setup provided. I have my own tig rig that I clamp my stinger to and run argon directly from bottle to torch. No big deal after a bit of brainstorming I came up with a fix to use my rig. No big deal the factory tig set worked great I just like my stuff better. So No negatives really just a preference type opinion.Pros: First, ( I only run 220 on all my machines. Won’t use the 110 adapter unless I truly have to-not provided)I fired up the arc welder and burned 3- 7018 3/32 rods. They went smooth and good bead. The machine was quit and didn’t sound like a Harley but more like a Vespa scooter. None the less it burned fine. Then I fired up the TIG setup, and keep in mind I used all the factory components first, the button on the torch is a bit different but the high frequency start worked 100%. Very nice. The amp gauge was a bit tricky. Either too hot or not enough, will need to play a it more. Otherwise the tig worked perfect as did the arc welding. The plasma cutter cane next and I layed out a piece of 3/16 diamond plate 4 ‘ long by 2’wide. I cut thru the 2’ side in about 25 seconds. A bit of slag on bottom and had to hit a few places twice but if you go slow, like you’re supposed to, it left a nice clean top surface and cut thru it like warm butter. I sliced thru the 4’ side in about 45-55 seconds. Never phased the tip or cullet whatsoever. You need plenty of good air pressure but unit and component work flawlessly. Overall I am 100% percent satisfied with this machine. Not one single problem or glitch to contend with and for that I’m giving it a 5 Star. Would buy again and would recommend. Hope this helps and good luck