🔋 Power Up Your Projects with Precision!
The DZS Elec MP1584EN Mini DC-DC Buck Converter is a high-performance power module designed for a variety of applications, including aviation models, DIY projects, and communication equipment. With an adjustable output voltage range of 0.8V to 20V and a maximum output current of 3A, this compact module ensures efficient power management with a remarkable transfer efficiency of up to 96%. Its wide input voltage range of 4.5V to 28V and robust operating temperature range make it a reliable choice for any project requiring precision and adaptability.
J**D
Very small and works great.
Product works great. I was able to regulate 12V to 3.3V. The product was missing any type of footprint dimensions. I've included picture of the footprint with pin spacing dimensions which seems to work for PCB design.
S**S
Works fine so far
Using to drop 12v to 5v for a water valve for misting system. So, ESP866 (D1 mini) on ESPhome for Home Assistant. 12v Solenoid Valve for 1/4" water valve. 3d printer box for electronics and box is inside house. Water valve mounted in wall outside. Added a Shelley button (awesome) so...one press turns on misters for 15 mins. HA shuts it off. Double press to toggle on off.These buck converters make it easy. The original design for this rig (can't remember where I got the design plan) had a 12v ps and 5v. One for micro controller and one for valve. Buck converter drops to 5v for the D1 mini and works great. Love these smaller bucks too.
M**S
OK but poor quality on the adjustment pot
I liked the function. It works well, when properly set up. I did destory a few LEDs due the tricky pot adjustment.In my particilar case, I might have been better off with a fixed 5 volt unit.
K**G
Amazing! Perfect for controlling fans
I had to control a few 12v .1 amp fans that would be running off a 17 volt battery This worked perfectly. Its small and has a flat back so all you need is some double sided tape to mount it.I accidentally shorted it out on the board twice and it kept working.
J**Q
Useful as a motor speed control
Works great. Desoldered the little pot from the board and soldered wires attached to a 250k ohm linear guitar amp pot to use this as a speed control. Works perfect. Now I can adjust the motor’s speed using the big pot mounted in a panel instead of trying to turn that micro pot and likely tearing it up.
Y**V
Can't handle 24v DC
Connected IN+ with 24+ and IN- with ground. No load. I double-checked polarity and input voltage. One module was short-circuited, and another blows up when connected. It could be a defective batch.
J**N
Used these to power an Apple TV from 12V.
I used these to modify an Apple TV to work from a cigarette lighter without using an inverter. Have had them installed for about 3 months and the Apple TV is working great. the adjustments on them are very small so you have to be careful when turning with a tiny screwdriver.
T**S
Very smooth output
using my multi meter I got this to output exactly 12.00v from my 24.00v source to power the fans on my 3D printer 3 amps is more than enough to run both the hotend and mainboard noctua fan
Trustpilot
1 month ago
2 months ago
